Desmontadora de llantas para camión G9156.11
DESMONTADORA DE LLANTAS PARA CAMIONES ELECTROHIDRÁULICA
Para neumáticos de camiones, máquinas agrícolas para trabajos de movimientos de tierra.
Las dimensiones y las carreras motrices permiten de trabajar con máxima efi ciencia en cualquier neumático.
Productos relacionados
-
Desmontadora de llantas G4441
Desmontadora de Autos G4441
Destalonador: cilindro cincado de simple efecto. Mandril autocentrador de gran rigidez y considerable campo de fijación con protección integrada para llantas de aluminio.
Commandes
Commandes de blocage de l’outil avec eloignement automatique de la jante.
Controls
Tool locking with automatic setting of appropriate distance from the rim.
DESCARGAR FICHA TECNICA -
Desmontadora de neumáticos G10360.17
DESMONTADORA DE LLANTAS G 10360.17 / G10360D.17
Desmontadora electrohidráulica para neumáticos de camiones, máquinas agrícolas y movimientos de tierra. Agarre hasta de 42”
(y 60” con prolongaciónes).ORBITAL
Ahorro de tiempo: el útil se mueve alrededor de la rueda sin necesidad de desplazar el carro.
TELEHOOK
Gracias al exclusivo útil telescopico, ya no es necesaria la rotación del mismo.
La fuerza de destalonamiento, con más de 3600 kg, facilita el desmontaje de neumáticos que se han quedado pegados a la
DESCARGAR FICHA TECNICA
llanta durante mucho tiempo o usados en condiciones especialmente difíciles, como zonas de obras, puertos o minas. -
Desmontadora de neumáticos G1800.4
COMPLETAMENTE SENZA LEVA / 3 MODALITA DI FUNZIONAMENTO
1. Standard
2. Automatico (simile Aikido)
3. Da PC
3 WORKING MODES
1. Standard
2. Automatic (like Aikido)
3. PC managed
3 BETRIEBSARTEN
1. Standard
2. Automatik (wie Aikido)
3. Über PCAUTOMATIC MODE
Place the upper roller on the rim edge Rotate the wheel and place the valve in start position. Press start button and the tyre changer is ready to work in automatic mode (Aikido program). Once the first wheel is done, the start position will be reached fast and automatically to repeat the job again and again
PC MANAGED OPERATION
- Fill in the tyre data
- The software automatically selects the best program among:
– SOFT
– STANDARD
– RF/UHP
The user can decide to switch to another program (but the software does not allow programs which are not appropriate to
that type of tyre). - Place upper and lower rollers at the rim edge and the valve at start position.
- Press start button and the tyre changer will carry out the programmed job with minimum assistance.
- At any time a job can be stopped and then continued with no need to start again the entire cycle.