Desmontadora de neumáticos G1800.4

COMPLETAMENTE SENZA LEVA / 3 MODALITA DI FUNZIONAMENTO

1. Standard
2. Automatico (simile Aikido)
3. Da PC
3 WORKING MODES
1. Standard
2. Automatic (like Aikido)
3. PC managed
3 BETRIEBSARTEN
1. Standard
2. Automatik (wie Aikido)
3. Über PC

AUTOMATIC MODE

Place the upper roller on the rim edge Rotate the wheel and place the valve in start position. Press start button and the tyre changer is ready to work in automatic mode (Aikido program). Once the first wheel is done, the start position will be reached fast and automatically to repeat the job again and again

PC MANAGED OPERATION

•  Fill in the tyre data
• The software automatically selects the best program among:
  – SOFT
  – STANDARD
  – RF/UHP
  The user can decide to switch to another program (but the software does not allow programs which are not appropriate to
  that type of tyre).
•  Place upper and lower rollers at the rim edge and the valve at start position.
•  Press start button and the tyre changer will carry out the programmed job with minimum assistance.
• At any time a job can be stopped and then continued with no need to start again the entire cycle.

COTIZACIÓN